A lot of people ask me what single channel amp can push a subwoofer and at what volume. In this article, I will focus on the single channel amp for subwoofer. I will provide details of its specifications. Also, I will cover all about the existence of a class D amplifier for a subwoofer in the market. If you want to know more information about Single channel amp for Subwoofer then read this post
Getting the right amp for your subwoofer is not easy, however, it is necessary if you want to ensure you get the best performance out of it. This is what this article will do, show you which amp to get based on many different factors.
Single channel amp for subwoofer
A single channel amp for subwoofer is an amp that drives a single loudspeaker or in simple words it creates a mono sound. There are many things to consider when buying an amp and the main question is why you want an amp and what do you need it for. Amps can be used in many different situations and there are several types available, which we will discuss shortly in this article.
Getting the right amp for your subwoofer is not easy, however, it is necessary if you want to ensure you get the best performance out of it. This is what this article will do, show you which amp to get based on many different factors. Trying to find the best single channel amp for subwoofer? It’s not easy, I know. I will try to make it easier for you with this article.
1. BOSS Audio Systems Car Audio Subwoofer Amplifier
BOSS Audio Systems is leading the way in car subwoofer amplifier engineering with their most recent line of subwoofer amplifiers. The AT-5004b features the newest technology resulting in class A/B topology, with class ‘A’ amplifiers having an enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through their outputs with no audio signal. This technology is known for better efficiency, more power, and unprecedented clarity. This unit is incredibly powerful at 1100 watts peak x 1 channel @ 2 ohms, 550 peak
The BOSS Audio Systems Magnum M1100.1 mono subwoofer amplifier is designed for use with a single subwoofer and offers 1100 watts of power to help you power your system. Built with a MOSFET power supply, this subwoofer amp is equipped with a variable crossover with a 40 to 110 Hz range for high-pass operation and 0-500 Hz range for low-pass operation. This subwoofer amplifier has 2 pairs of RCA preamp outputs that enable you to connect it to your head unit’s front and rear preamp outputs or pair of RCA preamp outputs or pair of R
The BOSS Audio Systems 1000 watt 8-channel car audio amplifier includes an integrated variable low pass crossover. The built-in crossover allows the user to choose different filter options for bass reproduction depending on what spaces are being filled by the speaker’s Audiophiles are known to get extremely involved in the details of product details, specifications, etc. This audience tends to enjoy technical information – however it should be expertly written so that laypeople can understand it.
An amplifier is required to bring out the best in your subwoofer. This BOSS Audio Systems Amplifier is constructed with an aluminum heat sink to keep the amp running cool. It features variable input gain control, bass boost switch, and RCA outputs. It delivers 375 watts of max power and has adjustable low pass crossovers for car subwoofer use.
Plug and play simplicity. Easy to change gain and bass boost controls without removing any trim pieces. Simply plug and play for instant audio performance and optimum sound quality and clarity.
2. Blaupunkt Single channel amp for subwoofer
This Blaupunkt 1-channel (mono) Class D high-power, mono amplifier sports a cool all-black look and 1500 watts of max output power. The frequency response of his amplifier is 5 – 500Hz so it is highly optimized to accommodate the output range of any subwoofer. This 150 watts per channel amp is designed with an adjustable Bass Boost and an active front channel protection system to protect against thermal overload, short circuits, and over-currents,
This amp pushes 1500 watts RMS and will handle any subwoofers you want to throw at it. As you can see the description is written from a technical viewpoint, which can be interesting for those of us who like this type of talk. The features and benefits of this amplifier include: 563 Watt RMS / 1500 Watt Max Output Power, 1 Ohm Stable Monoblock Class AB Amplifier, Remote Subwoofer Level Control Located By The Head Unit, Bass Boost and Audio Remote Turn-On and Feed-Forward Knock Limiters Adjusted Automatically by the Auto-EQ.
This 1500W max output power Blaupunkt Amp will increase the sound quality and volume of your factory vehicle’s audio system. It features a max power voltage of up to 30 volts and includes an 8ga. short pigtail. It is designed to fit most factory radios with the supplied mounting hardware and features a built-in cooling fan for optimal performance and is RMS rated at 563 watts.
Not only will the Blaupunkt 1500W 1-Channel, Monoblock Amplifier play your music loud and clear, but it’ll have you and your passengers partying all the way. If you’ve got a tiny trunk that can’t hold a huge amplifier with giant speakers, this is the best choice for you. The power output is so high that most people will not actually be able to use it at full capacity with their smaller speakers, which is almost never an issue.
3. Hifonics Mono Amplifier For Car Subwoofer
Hifonics are known for bringing listeners amazing car audio products, so if you are looking for an amplifier that will power up your speakers, look no further. The Brutus 2200 Watt Car Amplifier is one of the most powerful amplifiers on the market today, and with Ultra-Fi MOSFETs, you can expect excellent temperature control with minimal distortion. It can run on four ohms at 2250 watts or two ohms at 1100 watts. You will also love that it has a low pass subwoofer filter with adjustable crossover, variable gain control, bass boost with adjustable frequency, and level controls.
The Brutus 2200 .1 is a heavy-hitting Class D mono amplifier for those who want the horsepower of 2,000 max watts packed into a footprint that will fit in most car doors. This extreme efficiency amplifier features an exclusive Ultra-Fi topology that combines the stability of Class AB with the raw power of Class D. The result is more power and performance with less weight and smaller size than traditional designs. As always, our Brutus series amplifiers feature full protection circuits, including thermal, overload, and short-circuit protection. Modules are sold separately.
The Brutus Gamma 2200 watt mono amplifier features an Ultra-Fi MOSFET power supply for massive power output, while the Ultra-Fi protection circuit provides overload protection. A rugged metal chassis, IPN™ input stage protection, ultra-fast recovery time, all-metal construction, flush-mounted LED indicators and heavy-duty speaker terminals are just some of the reasons this amp is built to last.
The Hifonics Brutus Gamma 2200 Watt amplifier is an extremely versatile amplifier that features a switch-mode power supply, allowing it to produce 2,200 watts of power or more at 2 ohms. The surprising thing about this incredible amount of power is the efficiency of the amplifier. The superclass D amp draws 1.4A on 12V, yielding a total of 156 watts RMS at 2 ohms, also operating flawlessly at 4 ohms where it will draw only 0.8 amps for 550 watts RMS, but can go even lower using less than 100 watts RMS!
4. DS18 car subwoofer amplifier
The DS18 S-3500.1D/RD 3500 Watt Class D Mono Block Car Audio Amplifier is engineered to reach output in excess of 3,500 Watts RMS using less than 50% of the input power in most 15 Volt systems. A fully internal, high quality protection suite protects your investment with overload, short circuit, thermal and reverse polarity protection without sacrificing the deepest bass or power peaks. A fully stable 3,500 Watt output can be achieved with an input voltage 12 volts or higher with no need for an output capacitor when used with a clean 18-22 volt signal. It features a peak
The DS18-S Series of amplifiers are equipped with many protection features to ensure years of reliable service. The DS18-S Series amplifiers also protect against overload short circuit thermal low voltage high voltage and reverse polarity. These protection features are designed to protect the amplifier from misuse as well as common causes of amplifier failure.
This specially designed amp is the perfect way to power your subs and speakers. Its rugged circuit board is designed to survive the most demanding conditions, offering a high-power level with a low output of distortion, making it a piece worth adding to your car audio system.
With an output of 3500 Watts, the DS18 S-3500.1D/RD Amplifier delivers superior listening pleasure for enthusiasts thanks to its fully variable crossovers. It utilizes fully independent linear Class D circuitry that ensures solid electrical connections that resist corrosion for long life. This amplifier stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market.
Easily handle the challenges of moving up in sound quality with this high-power, one-channel (stereo) amplifier. It features one fully variable digital crossover network that allows you to set the outputs for any type of speaker system, including the complex multi-way systems that are used in vehicles fitted with navigation equipment or deadening materials.
5. Taramps Smart match subwoofers to amplifiers
The Taramps Smart Amp is a power amplifier with a class D multifunctional main circuit board and a tube preamplifier. It provides high performance with 1800 W of power, driven by the SMD standard, and seeks to provide an ideal experience for music enthusiasts through dynamics and rich sound. The TS3000 is a monoblock amplifier with a built-in variable high pass filter that matches the amplifier perfectly to a subwoofer enclosure.
It has a continuous power output of 3000 watts RMS at two ohms, 2000 watts RMS at four ohms, and 1500 watts RMS at eight ohms. The TS3000 is equipped with oversized high current terminals as used in the latest 14 gauge wire technology, as well as an external configurable high pass filter for optimum flexibility. The amplifier is extremely efficient with its thermal protection features, short circuit proof design, ground trigger input, full protection circuitry, and onboard voltage.
Introducing the Taramps Smart power amplifier for all your high quality power needs. This amplifier is equipped with variable voltage inputs, allowing you to change the voltage input to go from 3V to 8V. Features include high pass and low pass filters, 10Hz ~ 90Hz crossover, an over-heat function, subsonic filter, bass boost, speaker protection, and ground lift. This amp comes with a removable 3.5mm speaker jack to connect it directly to your subwoofer or speaker cabinet.
The Smart Series 3000 Watt Class D Mono Amplifier is built for DJs and music lovers who want powerful performance and a built-in crossover. A variable bass boost and low pass filter lets you fine-tune the bass and treble, adding punch to your sound. Multiple preamp outputs allow you to run separate effects and speaker systems for more versatility.
The Smart 3000 is a Class D amplifier with a high-efficiency power supply, excellent thermal control, and low distortion. In addition to its rich array of features, the Smart 3000 has been designed with both an amazing visual touch and the highest sound quality.
Is a mono amp only for subs?
Mono amps are not only for subwoofers. They are also sometimes used to power the mid-range. This is important for vehicles with limited space, especially vehicles with subwoofers in the doors. There are not enough speakers to power the subwoofers, so you can use a mono amplifier. The subwoofer channel will power both speakers, although the power is split between the two speakers. This is not ideal, but it’s better than not having any bass. If you install a subwoofer, you will need to have an amplifier.
What type of amp is best for subwoofer?
One of the main factors in deciding what type of amp you should get is the type of speaker. The most common speakers are the 2-way, 3-way, and 4-way speakers. 2-way speakers are designed to handle bass and treble frequencies. While your typical 3-way speaker is designed to handle the bass, mid-range, and treble frequencies. The mid-range refers to that range in between the lows and highs. A 4-way speaker is the same as a 3-way speaker, just designed to handle more frequencies. This is why 4-way speakers are preferred in most cases.
In the following, we shall be discussing the types of amplifiers. Let us first talk about the Sub-woofer amp. A sub-woofer amp is a special type of amplifier that is designed to drive a sub-woofer. It generally comes with a capacity ranging from 200 watts to 1000 watts. The sub-woofer amp is also used to drive the front PA speakers. The power from the main receiver is first divided into two. One is forwarded to the sub-woofer and the other is forwarded to the front PA speakers. The front PA speakers are quite louder as compared to the sub-woofer.
Can I use one amp for speakers and sub?
Yes, you CAN use one amp for speakers/sub, but it is NOT recommended. First, you are not using your sub to its full potential. It is capable of producing more bass, but it’s being suppressed by the amp. Second, you are not getting the most out of your speakers. Do you know what happens when the amp runs out of power? That’s right, it starts clipping. That means that some of your music may be distorted. Do you ever want to feel like the amp is struggling to power your speakers? I don’t think so. I recommend that you get a separate amp for each component in your system.
Can I hook up 2 subs to a single channel amp?
The answer is yes, but at the cost of lower efficiency. You can hook up two subs to a single channel amp but if you do that, you will be getting lower efficiency. As the impedance of the second sub is doubled, it will drop the voltage of the amp by 3dB. This will make the amp work harder to hit the same SPL as the single sub configuration. Efficiency, however, is never 100%, so you still won’t achieve the same level of output.
Related Post:
[…] Single Channel Amp For Subwoofer […]